Just wondering if anyone wired up their unit for a whole home backup solution or only critical loads.  If so, is there a wire diagram we can reference for both setups?  I would like to go...

Out of my 4 cells in the Bluetooth, as soon as one reaches 3.61v or 3.62v the BMS cuts off charging and it goes into balancing mode by bleeding the one or two that are high - but the two lower ones...

Use VE Direct Cable and set Solar Assistant Battery to USB VIctron VE Direct. Connection  USB1 VE Direct Cable.   You will not connect your battery communications directly to the Ras...

Hello everyone, I am currently using several sets of Humsienk 12.8V batteries, model 314Ah with BMS 100A Smart and Bluetooth connection, installed on 4kW/24V inverters. The issue affects more than ...

Hello, I have a Anenji 12k 48v 120/240 split-phase inverter, I had two Humsienk 48 v rack batteries and the system ran great, decided to add another Humsienk battery and the inverter alarmed out. ...

I have a 300ah wall mount and while it came with one set of connectors on 2AWG wires I need to add connectors to the other output terminals and I would prefer to use heavier gauge wire. If anyone ...

Wow, this is very very cool 

I got both the 48v 100AH and 300AH working with the following PowMr POW-SunSmart 6.5KP-PRO Eco-Worthy 3500W Solar Off-grid AIO Inverter

Can you post a list of inverters that have played well with your batteries?

Portable Power unit using Humsienk 12v 314AH Mini.  3000w 110v output to 20 and 30 amp plugs for tools and plugging in a 30amp camper. Charges using either shore power or solar power.

Excited for the 48v 400ah model. 20.4 kw 

Anyone out there????

I have 3 of the new 48v (51.2) 100ah rack mount batteries (set up in parrallel) with another 1 on the way.  Does anyone know how to get these to communicate with a Victron Smart Shunt and Ras...