| Parameter | Value |
|---|---|
| Rated input voltage | 120(L1/N, L2/N)/240Vac(L1/L2) |
| Permitted parallel number | 1~6 |
| Input phase voltage range | (85Vac~140Vac)±2% |
| Frequency | 50Hz/60Hz (Auto detection) |
| Frequency Range | 47±0.3Hz~55±0.3Hz(50Hz);57±0.3Hz~65±0.3Hz(60Hz) |
| Overload/short circuit protection | Circuit breaker |
| Maximum efficiency of municipal electricity charging | >95% |
| Conversion time (bypass and inverter) | 10ms (typical) |
| AC reverse protection | Yes |
| Maximum bypass phase overload current | 2pole, 60A/60A(L1/L2) |
| Parameter | Value |
|---|---|
| Output voltage waveform | Pure sine wave |
| Rated output power (VA) | Split phase: 12000W; Single phase: 7200W |
| Rated output power (W) | Split phase: 12000W; Single phase: 7200W |
| Power factor | 1 |
| Rated output voltage (Vac) | 120Vac (L1/N, L2/N)/240Vac(L1/L2) |
| Output voltage error | ±5% |
| Output frequency range(Hz) | 50Hz±0.3Hz/60Hz±0.3Hz |
| Maximum efficiency of inverter output | >92% |
| Overload protection | (105%< load <110%) ±5%: report error and turn off the output after 5 minutes; (110%< load < 125%) ±5%: report error and turn off the output after 10 seconds; Load >125%±5%: report error and turn off the output after 5 seconds; |
| Peak power | Split phase: 15000VA; Split phase: 10800VA |
| Loaded motor capability | 5HP |
| Output short circuit protection | Can protect, after continuous short circuit for 1 second |
| Bypass circuit breaker phase specification | 2pole, 63A/63A(L1/L2) |
| Rated battery input voltage | 51.2V (Minimum starting voltage 44V) |
| Battery voltage range | 40.0Vdc~58.6Vdc±0.6Vdc (Undervoltage alarm/shutdown voltage/overvoltage alarm /overvoltage recovery... settable on LCD screen) |
| Power saving mode self- consumption | Load per phase is null or less than 25W enter power- saving mode |
